Table of Contents
Advertisement
Final Installation
Installing
the access
cover and forming
the
copper
tubing
1. Reinstall the rear access cover on the
refrigerator so the water valve tubing is
inside the cover, and the copper water line
is outside (see the diagram below), then
secure the cover with the seven hex-head
screws you removed earlier.
2. Loop the copper tubing coming from the
water valve as shown. Position the coiled
copper tubing near the center of the unit so
that it forms an 'accordion-fold" (as shown
in the diagram below) when it is moved to-
and-from the wall.
Form tubing
loops as
I
shown
I
-
Copper
tubing
Place water
valve tubing
7
behind cover
I .
Installing the access cover and forming the copper tubing
22
Hide quick links:
Advertisement
Table of Contents
