Important Information - Whirlpool ECKMF94 - Automatic Ice Maker Installation Manual

Important Information
The following information is used throughout this installation Guide. Read it carefully SO you
are familiar with it.
information that alerts you to potentially
dangerous conditions. These conditions
can cause serious personal injury if the
suggested procedures are not observed.
@This Installation Guide gives you complete
instructions on how to install the Ice Maker
Kit in your refrigerator-freezer and connect a
water line to it. Please read the guide care-
fully and follow the instructions exactly as
described. Also, make sure that you observe
all of the 'safety" instructions.
*This kit is designed so that almost anyone
can install it; however, a certain amount of
mechanical ability is required.
l
Before you start to install your Ice Maker Kit,
you will have to purchase a copper tubing kit
that contains a "Regular Valve and Clamp
Assembly" (for refrigerators with an auto-
matic ice maker, or self-filling trays). The kit
contains all of the hardware necessary to
connect your ice maker to the water supply.
You can purchase one at most hardware or
plumbing supply stores.
@DO NOT USE PIERCING-TYPE, OR %r"
SHUT-OFF VALVES. They reduce the flow
of water to the ice maker, and are easily
clogged.
@DO NOT USE POLYETHYLENE TUBING to
connect the ice maker to the water line. Use
only '!4" (O.D.) copper tubing.
I
CUSTOMER INSTALLATION IS NOT
WARRANTED BY THE REFRIGERATOR
OR ICE MAKER MANUFACTURER.
I
R