HP LC2000r - NetServer - 128 MB RAM Configuration Manual page 3

FC Array Cards
No. of cards per cabinet
Firmware
Status SCSI ID
Disk SCSI IDs
Disk drives:
Fibre Channel Cables
Hub
Model
Quantity
LANs
LAN connection
NIC:
Model
Driver
No. of NICs
SPU I\O slot
HP Fibre Channel Array Controller - D5990A
2 (Requires second card be installed in the Rack Storage/12FC)
4.64-00 or later
5 (fixed)
0 – 3, 8 – 15 (fixed)
HP 9.1 GB (7200 rpm)Ultra SCSI Disk Module D6106A
HP 9.1 GB (10k rpm) Ultra SCSI Disk Module D6107A
HP 18.2 GB (7200 rpm) Ultra SCSI Disk Module D6108A
HP 18.2 GB (10k rpm) Ultra SCSI Disk Module D7031A
HP 18.2 GB (7200 rpm) Low Profile Ultra SCSI Disk Module D7174A
HP 18.2 GB (10k rpm) Low Profile Ultra SCSI Disk Module D7175A
HP 36.4 GB (10k rpm) Ultra SCSI Disk Module D8210A
Optical – Server to Hub Only: 50 meter D6980A
Copper – Server to Hub and/or Shared Storage to Hub:
HP D6976A 6-port fibre channel hub
1
Intra-cluster (Heartbeat) LAN
HP D5954A crossover cable or any
equivalent.
The intra-cluster LAN may only be
used for cluster node
communication via a crossover
cable. It may not be used for client
communication.
Embedded NIC
Supplied with Microsoft Advanced
Server CD
1
N/A
100 meter D6981A
3 meter D6978A
5 meter D6979A
10 meter D7080A
Client LAN
Any LAN
Any that is on both the HP
Tested Products List and the
Microsoft Hardware
Compatibility List.
Any driver
NOTE
If the NIC used is the
same type as the embedded NIC
(D5013A/B), then the Client
LAN NIC must use the same
driver as the Intra-cluster NIC.
1 minimum
P3