HP LC2000r - NetServer - 128 MB RAM Configuration Manual page 2

Power source
System software:
Navigator version
Operating System
SPU
Model
Clock speed
No. of CPUs
BIOS version
CPU cache
RAM
No. of power supplies
Local storage
I/O slots:
Storage
Local
Controller
Driver
Cabinets (Physical drive
location)
Disk drives
SCSI bus
SCSI Ids
Shared
HP Rack
Storage/12FC
Host Bus Adapter
Model
No. of controllers
Driver
SPU I/O slot
RAID level
Cabinet
RAID arrays
Number of cabinets
Direct from power mains, power conditioner or uninterruptible power
supply (UPS) using any power conditioner or UPS.
L.18.02 or later
Microsoft Windows 2000 Advanced Server
HP NetServer LC 2000
733 MHz
2
4.06.20 PV or later
Any size
256 MB minimum. Must be HP.
1 standard, 2 required
See Local Storage below.
P1 - Local storage
P3 - Client LAN
P5 - Shared Storage
Use embedded SCSI as the boot controller. For additional local storage:
May use embedded SCSI or NetRAID-1Si in PCI slot P1.
May not use embedded RAID, NetRAID-1, NetRAID-3, or NetRAID-3Si.
Use driver(s) supplied with Microsoft Windows 2000 Advanced Server.
SPU internal drive bays or HP external drive cabinet (e.g., HP Rack
Storage/12), any number.
Must be HP (hot swap or fixed)
Any HP cables that meet SCSI specifications and any SCSI bus speed.
Any
Required
HP Fibre Channel Host Bus Adapter - HP D8602A
1
Hhba.sys 2.06
P5
0,1, 3, 5
Not more than eight physical drives per logical array and not more than
eight LUNs are permitted per multiple Rack Storage 12/FC clusters.
1