The drive panel only fits one way.
1
drive panel
Floppy Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
Removing the Floppy Drive
1. Follow the procedures in
"Before You
2. Remove the drive panel by sliding the drive release latch downward to open the panel, then remove it from the 3 hinges.
3. Disconnect the power and floppy-drive cables from the back of the floppy drive.
4. Remove the floppy drive by sliding and holding the drive release latch downward. Then, slide the drive out of the computer.
1
floppy drive
2
release latch
Installing the Floppy Drive
Begin."