Drive-Panel Inserts - Dell GX280DT - GX280 Desktop Computer User Manual

11. Connect your computer and devices to their electrical outlets, and turn them on.
12. See the documentation that came with the drive for instructions on installing any software required for drive operation.
After you open and close the cover, the chassis intrusion detector, if installed and enabled, causes the following message to appear on the screen at
the next computer start-up:
ALERT! Cover was previously removed.
13. Reset the chassis intrusion detector
NOTE: If an admin password has been assigned by someone else, contact your network administrator for information on resetting the chassis intrusion
detector.
Drive-Panel Inserts
If you are installing a new floppy or CD/DVD drive instead of replacing a drive, remove the drive-panel inserts.
1. Follow the procedures in "Before You
2. Remove the drive panel by pressing the drive release tab.
1 drive panel
2 release tab
3. Select the insert in front of the drive bay that you want to use.
4. Gently press the release tab of the insert to remove it from the drive bay panel.
1 CD/DVD drive insert
2 floppy drive insert
3 shoulder screw holder
5. Reattach the drive panel to the front of the computer.
by changing Chassis Intrusion to On or On-Silent.
Begin."