Step 4-Reassembling The Workstation; Japanese 日本語 - HP Z600 - Workstation - 6 GB RAM Installation Manual

HP 600, 800 and xw9400 Workstations power and data cabling
1. Connect the center connector of the Y-adapter power cable to the workstation optical drive power
supply
2. Connect one end of the Y-adapter power cable to the optical drive power connector
3. Connect the other end of the Y-adapter power cable to the power connector on the IEEE-1394 card
.
NOTE:
connector from the system board.
4. For the HP
IEEE 1394 card. (Shown above in
Figure 4 Connecting the power cable
Step 4—Reassembling the workstation
1. Reinstall the card support, if applicable.
2. Reinstall the side access panel.
3. Reconnect power to the workstation and all external devices.
4. Restore power to the workstation and all external devices.
Japanese 日本語
This document is available in Japanese. See http://www.hp.com/support/workstation_manuals, then
select your workstation product and select Japanese from the drop down Manual Language menu.
このドキュメントは日本語版が用意されています。http://www.hp.com/support/workstation_manuals
にアクセスし、ご使用のワークステーション製品を選択し、Manual Language ドロップダウン メニ
ューから Japanese を選択してください。
6 IEEE-1394b PCI Express Card installation
.
For HP 800 Workstations and HP xw9400 Workstations, do not unplug the front I/O
600 Workstation, connect the front IEEE1394 I/O cable to the I/O connector on the
Figure 3 Connecting the IEEE 1394 cables on page
.
2
5, )
2
ENWW