Lenovo ThinkPad L410 Deployment Manual page 36

Under Computer Configuration, click Administrative Templates ➙ Lenovo ThinkVantage
Components ➙ Power Manager ➙ Global Power Setting.
• For Windows Vista or Windows 7 client computers (ADM file)
Under Computer Configuration, click Administrative Templates ➙ Classic Administrative Templates
➙ Lenovo ThinkVantage Components ➙ Power Manager for Vista/7 ➙ Global Power Setting.
• For Windows Vista or Windows 7 client computers (ADMX file)
Under Computer Configuration, click Administrative Templates ➙ Lenovo ThinkVantage
Components ➙ Power Manager for Vista/7 ➙ Global Power Setting.
This table provides detailed information about each policy.
Table 3. Global Power Setting
Policy settings
Beep when power state changes
Require password on standby resume
Enable Hibernation
30
Power ManagerDeployment Guide
Description
Specifies whether the computer beeps when it is in one
of the following conditions:
• When the computer enters standby mode.
• When the computer resumes operation after being in
standby mode.
• When the computer enters hibernation mode.
• When the computer resumes operation after being in
hibernation mode.
• When the ac power adapter is connected to the
computer or is disconnected from the computer.
If you enable this policy setting, the computer will sound
a beep.
Specifies whether or not the user is prompted for a
password when the system resumes from sleep.
If you enable this policy setting, the user will be prompted
for a password when the system resumes from sleep.
This setting is supported only for the administrator
account. For Windows Vista and Windows 7 operating
systems, this setting takes effect only when the User
Account Control (UAC) feature is disabled.
Specifies whether to enable the computer to enter
hibernation mode.
This setting is supported only on Windows XP client
computers.