Table of Contents
Advertisement
• Shake to update: Once enabled, shake your device to rescan
for Bluetooth devices, rescan for Wi-Fi devices, Refresh a Web
page, etc.
• Turn over to mute/pause: Once enabled, mute incoming calls
and any playing sounds by turning the device over display down
on a surface. This is the opposite of the pickup to be notified
gesture.
• Palm swipe to capture: Once enabled, you can capture any
on-screen information swiping across the screen. In a single
motion, press the side of your hand on the screen and swipe
form left to right. The image is then copied to the clipboard.
• Palm touch to mute/pause: Once enabled, you can pause any
on-screen video or mute any current sound by simply covering
the screen with your hand. Once you remove your hand from
the screen, the device goes back to normal by either continuing
to play the current video or unmuting the current sound.
To adjust gesture sensitivity:
1. From the Home screen, press
Settings
Motion
2. Tap an available field to access the sensitivity settings
for the currently active gesture. Choose from:
• Gyroscope calibration: Allows you to properly calibrate your
device for use with motion gestures.
• Tilt to zoom: Allows you to zoom in or out when in the Gallery
or Internet.
• Pan to move icon: Allows you to move an icon to another
page.
• Pan to browse images: Allows you to move around an image
when zoomed in.
Note: Sensitivity settings are only accessible if the gesture is
currently active.
and then tap
Sensitivity settings.
Changing Your Settings
329
Advertisement
Table of Contents
