Table of Contents
Advertisement
Wi-Fi
About Wi-Fi
Wi-Fi (short for "wireless fidelity") is a term used for certain
types of Wireless Local Area Networks (WLAN). Wi-Fi
communication requires access to an existing and accessible
Wireless Access Point (WAP). These WAPs can either be
Open (unsecured) as within most Hot Spots, or Secured
(requiring knowledge of the Router name and password).
Note: After you complete a connection to an active Wi-Fi
network, the Wi-Fi Calling feature will automatically be
enabled.
Note: For additional information on WPS Connections, refer to
"WPS Push Button" on page 279 and "WPS PIN Entry"
on page 279.
270
Activating Wi-Fi
By default, your device's Wi-Fi feature is turned off
(deactivated). Activating Wi-Fi allows your device to discover
and connect to compatible in-range WAPs (Wireless Access
Points).
1. From the Home screen, press
Settings.
2. In a single motion touch and slide the Wi-Fi slider to the
right to turn it on
the activation status. The device scans for available
in-range wireless networks and displays them under
Wi-Fi networks on the same screen.
Connecting to a Wi-Fi Network
1. From the Home screen, press
Settings
Wi-Fi.
The network names and security settings (Open
network or Secured with WEP) of detected Wi-Fi
networks display in the Wi-Fi networks section.
2. Tap the network you wish to connect to.
and then tap
ON
. The slider color indicates
and then tap
Advertisement
Table of Contents
