AllShare Cast Hub - Troubleshooting
Connections
•
If this is the first time you are connecting your device to a hub
and the connection fails:
• Press the RESET button for 1 second until it turns solid BLUE.
• Quickly tap the dongle name from within your device's AllShare
cast screen.
Note: This process is similar to initially pairing a Bluetooth
device.
•
If you have already successfully paired another device and you
are trying to connect another device:
• Only one device can be paired and in use at a time with the
hub.
• From the previously connected device's AllShare Cast screen,
tap the connection and select End connection.
• If you can't find the previous device:
–
Press and hold the RESET button (on the back of the hub),
for about FOUR seconds until the LED begins to blink RED.
–
Access your new device's AllShare Cast screen and rescan for
the existing hub/dongle.
–
Press the RESET button on the hub for ONE second until the
LED turns BLUE.
–
Tap the entry from your device's AllShare Cast screen and
confirm connection.
Important! The AllShare Cast Hub is a 1-to-1 connection. If a
previous device was paired to the Hub and is still
connected to the AllShare Cast Hub, you can not
pair a new device until the first connection is
stopped.
•
I have a new device and the hub is connected but it doesn't show
up in my list:
• Force the hub to disconnect from any previously paired
devices:
–
Press and hold the RESET button (on the back of the hub),
for about FOUR seconds until the LED begins to blink RED.
–
Access your new device's AllShare Cast screen and rescan for
the existing hub/dongle.
–
Press the RESET button on the hub for ONE second until the
LED turns BLUE.
Multimedia
209