Table of Contents
Advertisement
Controlling the Projector
(Set JavaScript On)
* In case of 2 lamps model
There are various kind of ways to change the JavaScript preference depending on the web
browser's version and application. Please refer to chapter "Appendix: Web browser
setting/Active Script (JavaScript enable)" on page 72.
46
(Set JavaScript Off)
Item
Description
......Sets one of 2 types remote
Remote Control
control codes.
Lamp Counter
Reset ................Resets the lamp use-time.
Reset when replaced lamp.
P-TIMER ............Used to display the timer on
the screen. The status is
changed as OFF -> STOP ->
ON when this button is
pressed repeatedly.
About Lamp Counter reset
The confirmation window as the left will
appear when the Reset button of the "Lamp
Counter Reset" is pressed. Select which
lamp counter is to be reset with the radio
button and then press the OK button.
Item
Description
Actual Time........Displays the current time set to
the projector.
Timer Setting ....Function to switch on or off the
projector at the programmed
date and time. Please see
chapter "How to set the
Timer" for further instructions.
Advertisement
Table of Contents
