Table of Contents
Advertisement
Installation
[3] Confirmation of network menu activity
When installing this product to the projector, the network on-screen menu items for
this product are activated automatically.
been installed
Turn on the projector and display the menu on the screen.
Confirmation of network setting menu [Network]
Using the pointers on the remote
control handset or on the projector,
select the Network icon from the
Setting sub menu, and then press
the SELECT button once. Check if
the setting is On. If not, switch to
On by using the pointer
power indicator on this product will
illuminate red.
Press the SELECT button again,
the network setting menu appears
on the screen as follows. For fur-
ther information about network set-
ting, please see chapter "Network
configuration"on the next page.
Confirmation of password setting menu [Display]
Using the pointers on the remote
control handset or on the projector,
select the Display icon from the
Setting sub menu, and then press
the SELECT button twice. The
password setting menu appears on
the screen. If not, please check if
the function of Network is On as
explained
on
"Confirmation of network setting
menu". For further information
about password setting, please see
"Password setting menu" on page
17.
14
correctly. Please check chapter "Mounting" on page 12.
/
. The
previous
item
If not activated, the product may not have
NETWORK SETTING
IP Address
Sub net
Gateway
DNS
* The above on-screen display may differ from
the actual display depending on the functions
of the projector you use.
192
168
0
255
255
255
0
0
0
0
0
0
SET
CANCEL
Password
0
0
0
SET
CANCEL
2
0
0
0
0
Advertisement
Table of Contents
