Samsung DVD-L200W Manual page 12

ENGLISH ENGLISH
Connecting to a Stereo Component
Digital Audio Output (optical)
Audio component DIGITAL
equipped with optical
digital input jack
COAXIAL OPTICAL
After the completion of above connections;
Set the "Digital Output" to "PCM" (see page 50) in "Audio Setup".
Digital connection to audio component without Dolby Digital decoder
• Audio CD
Play the disc.
When connecting digitally, DTS-encoded audio tracks will produce distorted sound.
• DVD Disc
When playing a Linear PCM Audio encoded disc, you must use the digital connection
method shown above.
NOTE: NOTE:
Only use an optical Digital Cable which has been designed for use with portable DVD.
22
Optical Digital Cable
(Sold Separately)
DIGITAL OUT
Connect to optical digital input jack
Connecting to a Stereo Component
Playing Dolby Digital (5.1-CH) and DTS Audio
• You can enjoy full and dynamic surround sound by connecting a Dolby Digital/DTS
digital surround processor or amplifier to the optical digital jack on the DVD player.
• When using DTS digital surround, select the DTS audio by using the disc menu screen
or function adjustment screen.
Connect to an Optical Digital Input Jack
DIGITAL
Dolby Digital (5.1-Channel)/DTS
COAXIAL OPTICAL
processor or amplifier
After making the connections shown above;
Set the "Digital Output" to "Bitstream" (see page 50) in "Audio Setup".
Caution
• To play a DTS disc, you need a DTS processor or amplifier.
• If the DTS processor or amplifer you want to use does not have an optical digital input jack,
digital connection is not possible.
• Refer to owner's manual of the processor or amplifier for details on connections.
ENGLISH
DIGITAL OUT
Optical Digital Cable
(Sold Separately)
23