Table of Contents
Advertisement
00184P-L200W(ENG)
8/28/03 9:55 AM
ENGLISH
ENGLISH
Using the battery pack
Important!
• When inserting the battery pack, make sure that it is inserted correctly.
Otherwise, your DVD player may malfunction.
Charging the battery pack
Use the AC adapter (included) to charge the battery pack.
• Before charging, make sure that the battery pack is correctly seated.
1. Connect the AC cord to the jack on the AC adapter ( ).
2. Connect the DC cord to the DC IN jack on the left side of the DVD player ( ).
3. Plug the other end of the AC cord into an AC outlet ( ).
Blinking time
Once per second
Less than 50%
Twice per second
50%~75%
Three times per second
75%~90%
Blinking stops and stays on
90%~100%
On for a second and
Error-Reset the battery pack and
off for a second
the DC cable
Power Charge Lamp
-Green light will flash while charging.
-When the battery pack is fully charged, the light will stop blinking and remains green.
26
Page 26
1
3
Charging rate
2
1
2
3
Advertisement
Table of Contents
