Status Message - Kenwood TK-2140 Instruction Manual

S M
TATUS ESSAGE
You can send and receive 2-digit Status messages
(10 ~ 79) which may be decided in your talk group.
Messages can contain up to 16 alphanumeric
characters.
A maximum of 9 received messages can be stored in
the stack memory of your transceiver. These saved
messages can be reviewed after reception. If the stack
memory is full, the oldest message will be erased when
a new message is received. The mail icon (
when a message is stored in the stack memory.
Note: All stored messages will be cleared when the transceiver
power is turned OFF.
■ Transmitting
1 Select your desired system and group (or group
and channel).
2 Press the A key to enter Selcall Mode.
3 Press the t t t t t B key or C s s s s s key to select the ID of
the station you want to call.
4 Press the A key to enter Status Mode.
5 Press the t t t t t B key or C s s s s s key to select the status
you want to transmit.
6 Press the PTT switch to initiate the Status call.
•
"COMPLETE" is displayed when the call has been
successfully transmitted.
30
) lights