Receiving A Status/Short Data Message Call; Call Displays - Kenwood TK-285 Instruction Manual And User Handbook

Receiving a Status/Short Data Message Call

1 When a call is received, the
on the display and flashes.
• The
is data in the stack.
2 To view the status or message, refer to "Viewing
the Stack", on page 14.

Call Displays

The following messages may appear on the display
under certain circumstances:
Holding: The transceiver is confirming the call made by
the base station.
Engaged: The called party is in another call.
Queued: All communication channels are currently in
use; your status will be sent when a channel becomes
free.
Fail: The control station received an invallid call.
NU: You entered an invallid call address.
No Reply: The called party has been called, but they
did not respond to the call.
Call Back: The called party has set their transceiver to
queue all incoming calls.
Sys Busy: The system is currently busy.
indicator remains on the display when there
indicator appears
13