Listening To An Aux Input Source - Kenwood HM-DV6MD Instruction Manual

Listening to an AUX input source

Connect the related equipment under reference to "Connection of external source component"
1
Press the AUX key.
2
Play the connected equipment.
3
Adjust the volume.
VOLUME/
MULTI CONTROL
Adjusting the AUX Input Level
This adjusts the input level for the external equipment (video deck etc.) connected to the AUDIO AUX IN
terminal. Adjust so that the volume of the AUX input source sounds at an equivalent level to the CD or MD.
(Main unit operation only)
1
Press the AUX key.(Select the "AUX" input)
2
Press the MODE key.
3
Turn the VOLUME/MULTI CONTROL knob
to select "INPUT LEVEL", then press the
SET/ DEMO key.
VOLUME/
MULTI CONTROL
4
Adjust the input level.
VOLUME/
MULTI CONTROL
The level
decreases
5
Set it.
SET/DEMO
AUX
AUX
MODE
SET/DEMO
\
The level
increases
Each press switch the modes as follows.
1 "AUX" (Analog)
2 "DIGITAL AUX" (Digital)
Each press switch the modes as follows.
1 "AUX" (Analog)
2 "DIGITAL AUX" (Digital)
I N P U T
A U X I N P U T + 1
÷ Adjustment is possible over the range from - 4 to + 3.
÷ Adjusting the input level control also varies the record-
ing level from the input source connected to the AUX
input jacks.
87
Timer operation
9
L E V E L
Input level