Listening To An Aux Input Source - Kenwood HM-982RW Instruction Manual

Listening to an AUX input source

74
A cassette deck, MD recorder or a similar component can be connected to the system as the auxiliary input
source.
Connect the component as described in "Connection of Other Accessories"#.
Listening to Analog equipment
1 Press the AUX/D-AUX key repeatedly until
"AUX".
AUX/D - AUX
2 Play the connected equipment.
3 Ajust the volume.
DOWN
Adjusting the input level of the auxiliary source
In case the input level from an auxiliary analog source is different from that from the internal source of the system such as the CD player,
the auxiliary input level can be adjusted to match the internal input level.
1 Press the MENU key.
2 Press the MULTI CONTROL keys to select
"AUX Input?", then press the SET key.
MULTI
CONTROL
When the input level is adjusted, the level of recording of the signals from the auxiliary input source connected to the AUX
Note Note
input jacks changes.
UP
VOLUME
MENU
\
\ SET
Listening to Digital equipment
1 Press the AUX/D-AUX key repeatedly until
"D-AUX".
÷ If "Unlock" is displayed when D-AUX is selected, see
"Displayed message list".
2 Play the connected equipment.
3 Ajust the volume.
(The input level from an auxiliary digital source cannot be adjusted.)
3 Adjust to the desired input level using the
MULTI CONTROL keys.
÷ The adjustment is possible in the range from -5 to +2.
4 Press the SET key.
Timer operation
AUX/D - AUX
DOWN UP
VOLUME
SET
·w
G