Listening To An Aux Input Source - Kenwood HM-582MD Instruction Manual

Contents

Listening to an AUX input source

70
A CD player with an analog or optical digital output, MD recorder, cassette deck or a similar component can be
connected to the system as the auxiliary input source.
Connect the component as described in "Connection of Other Accessories"9.
Listening to an Analog equipment
1 Press the AUX key.
2 Play the connected equipment.
3 Ajust the volume.
VOLUME
Adjusting the input level of the auxiliary source
1 Press the menu/demo key.
2 Rotate the volume/multi-control knob to se-
lect "AUX D. LEVEL ?" or "AUX A. LEVEL ?",
then press the set key.
volume/
multi-control
AUX
Listening to a Digital equipment
1 Press the MD 6 key.
MD
6
÷ If a MD has already been loaded, it starts to play now.
Press the 7 STOP key to stop it.
2 Set the MONITOR mode to "ON". ›
3 Play the connected equipment.
4 Ajust the volume.
VOLUME
3 Adjust to the desired input level using the
volume/multi-control knob.
AUX D LEVEL ........ - ~+12 dB
AUX A LEVEL ........ -4~+3
4 Press the set key
When the input level is adjusted, the level of recording
of the signals from the auxiliary input source connected
Note Note Note
to the AUX (TAPE/MD) input jacks and optical digital
input jack also changes.
Timer operation