Canon 3303B002 User Manual page 21

Document Requirements
Types of Document You Can Scan
Scanned Area
The actual area scanned by the fax is
shown below.
LTR/LGL
0.08 ±0.14 in. 0.08 ±0.14 in.
(2.0 ±3.5 mm) (2.0 ±3.5 mm)
Problem Documents
To prevent document jams in the ADF, do not attempt to load the following types of
documents into the fax:
- Wrinkled or creased paper
- Torn paper
- Coated paper or glossy paper
- Thick paper
Remove all staples, paper clips, etc. before loading the document into the ADF.
Make sure any glue, ink, or correction fluid on the paper is completely dry before loading the
document into the ADF.
Make a photocopy of any document that will not feed into the fax so that you can then load the
copy into the ADF.
20 Before Using Your Machine
0.12 ±0.12 in.
Min. 4.2 in.
(3.0 ±3.0 mm)
(105 mm)
0.08 ±0.08 in.
(2.0 ±2.0 mm)
Size
You can load documents larger than 4.2 in.
(105 mm) wide and 4.2 in. (105 mm) long.
The maximum size of document that can be
loaded is 8.5 in. (216 mm) wide by 15.8 in.
(400 mm) long.
Min. 4.2 in.
(105 mm)
Max. 8.5 in. (216 mm)
- Curled or rolled paper
- Carbon paper or carbon-backed paper
- Onion skin or thin paper
- Envelopes
Max. 15.8 in.
(400 mm)