Table of Contents
Advertisement
Alarm list
Introduction
This section explains the alarm that can occur with this product.
Alarm will be indicated on the printers display. See the manual that comes with the
printer for information about alarm message or required action.
Alarm list
#
Alarm timing
Paper remaining in
the gathering tray.
Out of glue.
Trimmer waste
unit is full.
Defective booklets.
Stacker is full.
Error scenario
Status in the dash-
board (see
'Check
the status of the glue'
on page
79)
Status in the dash-
board (see
'Check
the status of the
trimmer waste unit'
on page
78)
Error scenario
Error scenario
Required action
Remove the paper
from the gathering
tray.
Replenish the glue.
Remove cuttings
from the trimmer
waste tray.
Remove the paper
stack of the defec-
tive booklets from
the stacker.
Remove the fin-
ished booklets from
the stacker.
Chapter 4 - Troubleshooting
Alarm list
More information
'Clear a paper jam
inside the top cover'
on page 61
'Clear a paper jam
inside the front cov-
er' on page 65
'Clear a paper jam
in the stacker' on
page 71
'Replenish glue' on
page 54
'Discard cuttings' on
page 52
'Remove finished
booklets' on page
49
'Remove finished
booklets' on page
49
83
Advertisement
Table of Contents
