Table of Contents
Advertisement
#
•
Do not install the machine in unstable locations, such as unsteady platforms
or inclined floors, or in locations subject to excessive vibrations, as this may
cause the machine to fall or tip over, resulting in personal injury.
•
Never block the ventilation slots and levers on the machine. These openings
are provided for proper ventilation of working parts inside the machine.
Blocking these openings can cause the machine to overheat. Never place the
machine on a soft surface, such as a sofa or rug.
•
The machine may emit gas when the glue is melting that could irritate the
eyes, nose and throat, however this gas is not harmful to humans. Keep the
room ventilated to maintain a comfortable work environment.
•
Do not install the machine in the following locations:
- A damp or dusty location.
- A location near water faucets or water.
- A location exposed to direct sunlight.
- A location subject to high temperatures.
- A location near open flames.
•
Do not remove the machine's leveling feet after the machine has been installed,
as this may cause the machine to fall or tip over, resulting in personal injury.
CAUTION
Installation precautions
Chapter 1 - Introduction
13
Advertisement
Table of Contents
