How To Check The - Canon imagePRESS C7010VPS/C6010VPS/C6010S Series User Manual

How to check the breaker
Confirm that the breaker switch toggles to the OFF (O) side and the power turns off.
2.
#
IMPORTANT
• The test button is not intended to be used to turn power on and off.
• If the breaker switch does not toggle to the OFF (O) side, perform step 1 again.
• If the breaker switch does not toggle to the OFF (O) side even though you perform
step 1 two or three times, contact your local authorized dealer.
After performing the above test, turn off the power switch.
3.
Return the breaker switch to the ON (I) side.
4.
Turn on the power switch.
5.
Enter the date and time of the test into the next available entry of the breaker test
6.
checklist sheet.
22 Chapter 1 - Introduction