3.3.2 Cable connector specifications
Table 3.2 lists the recommended specifications for the cable connectors.
ATA interface and power
supply cable (44-pin type)
For the host interface cable, use a ribbon cable. A twisted cable or
a cable with wires that have become separated from the ribbon may
cause crosstalk between signal lines. This is because the interface
is designed for ribbon cables and not for cables carrying differential
signals.
3.3.3 Device connection
Figure 3.9 shows how to connect the devices.
C141-E104-03EN
Table 3.2 Cable connector specifications
Name
Cable socket
(44-pin type)
IMPORTANT
Figure 3.9 Cable connections
3.3 Cable Connections
Model
Manufacturer
89361-144
BERG
3-11