Creating Mirrorclones; Creating Snapclones (Preallocated); Creating Snapclones (Standard) - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual
Hp storageworks replication solutions manager 4.0.1 user guide (t3680-96308, june 2008)
Hide thumbs
Also See for 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure:
- Command reference manual (207 pages) ,
- Maintenance and service manual (63 pages) ,
- User manual (60 pages)
Table of Contents
Advertisement
3.
Select Actions > New DR Group. The Replicate Wizard opens. Follow the instructions in the
wizard.
Creating mirrorclones
Use a container to create a synchronized mirrorclone copy of a virtual disk. See virtual disks
synchronized mirrorclones
Considerations
•
You can use the GUI, or jobs to create a synchronized mirrorclone. See
virtual disks actions cross
•
A container that is the same size as the source virtual disk must already exist. Procedure.
•
Guidelines apply. See virtual disks
•
Dynamic capacity management guidelines apply. See
for more information.
Procedure
The following procedure uses the GUI.
1.
In the navigation pane, select Virtual Disks.
2.
On the List tab, select the source virtual disk to replicate using the mirrorclone method.
3.
Select Actions > Create Mirrorclone. The Mirrorclone window opens. Follow the instruction
in the window.
Creating snapclones (preallocated)
Use a container to create a point-in-time snapclone copy of a virtual disk. See virtual disks
preallocated snapclones and
Considerations
You can use the GUI, jobs, or the CLUI to create preallocated snapclones. See virtual disks
•
actions cross
•
A container that is the same size as the original virtual disk must already exist. Procedure.
•
Guidelines apply. See virtual disks
•
A flush of the source virtual disk write cache is required before replication is started. See
preallocated
•
Dynamic capacity management guidelines apply. See
for more information.
Procedure
The following procedure uses the GUI.
1.
In the navigation pane, select Virtual Disks.
2.
On the List tab, select the virtual disk to replicate using the preallocated snapclone method.
3.
Select Actions > Snapclone-Preallocated. The New Preallocated Snapclone window opens.
Follow the instruction in the window.
Creating snapclones (standard)
Create a point-time snapclone copy of a virtual disk. See virtual disks snapclones.
418
Virtual disks
and containers.
reference.
mirrorclone
containers.
reference.
snapclone
snapclones.
guidelines.
Using DC-Management with replication
guidelines.
Using DC-Management with replication
Advertisement
Table of Contents
Troubleshooting
