Viewing Managed Sets; Viewing Managed Set Properties; Managed Sets Concepts; Managed Sets Overview - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual
Hp storageworks replication solutions manager 4.0.1 user guide (t3680-96308, june 2008)
Hide thumbs
Also See for 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure:
- Command reference manual (207 pages) ,
- Maintenance and service manual (63 pages) ,
- User manual (60 pages)
Table of Contents
Advertisement
Procedure
This procedure uses the GUI.
1.
In the navigation pane, select Managed Sets.
2.
On the List tab, select the managed set.
3.
Select Actions > Remove Member. The Remove Members window opens.
4.
Select the members to remove.
5.
Click OK. The members are removed
Viewing managed sets
Display the managed set list and member views. See managed sets views.
Considerations
•
You can use the GUI or CLUI. See managed sets
Procedures
This procedure uses the GUI.
1.
In the navigation pane, select Managed Sets. The content pane displays managed sets.
2.
Click the List tab. A tabular list of managed sets appears.
3.
Click the Members tab. A tabular list of managed set members appears.
Viewing managed set properties
View information about managed sets and their members. See managed sets
You can use the GUI or CLUI. See managed sets
Procedure
This procedure uses the GUI.
1.
In the navigation pane, select Managed Sets.
2.
On the List tab, select the managed set whose properties you want to view.
3.
Select Actions > View Properties. The Managed Set Properties window opens.
Managed sets concepts
Managed sets overview
A managed set is a named set of resources that can be acted on as a single entity. For example, the
managed set Sales_Disks might include two virtual disks, West_Sales and East_Sales.
Performing an action on a managed set performs the action on all the members in the set. For example, if
you perform the New Snapshot action on the managed set Sales_Disks, the replication manager creates
a snapshot of West_Sales and a snapshot of East_Sales.
Set types
When you create a managed set, you must specify its resource type. After the set is created, you can only
add members of that resource type The following resource types are supported.
actions cross
reference.
actions cross
reference.
HP StorageWorks Replication Solutions Manager 4.0.1
properties
summary.
381
Advertisement
Table of Contents
Troubleshooting
