Samsung DVD-R100 Update Manual

Introduction
Introduction
When you encounter the problem which is not related in Drive Firmware necessity.
How to make an update disc
How to make an update disc
Write the downloaded file onto a blank CD-R or CD-RW disc, using the following settings:
1) Download the software update file from the Samsung Internet Site. (www.samsungusa.com)
2) Write the file to disc using the CD-RW of your computer.
¡á Recommended Application Program
¡Ü Nero Burning / Easy CD Creator ..etc
¡á Option
¡Ü Multisession ; No Multisession
¡Ü Finalize & Disc At Once
¡Ü ISO 9660 or Joliet Format
¡Ü Extension name ; "*.RUF" ( make sure if the downloaded software is for your DVD-R100. )
- Update file name : XXXXXX_XX_R100.RUF
¡á In order to increase Disc Playability, add a dummy file (over 100MB) together with the latest
program.
(The Dummy File can be used any kind of file except MP3 file etc which can be played in the
unit and we recommend to use a file with extension name as "*.dmy", which can be changed
from original one.)
Update procedure
Update procedure
It is very important ; please read the below notice below before updating your unit.
The following events may interrupt the update process and
DAMAGE TO THE UNIT WHILE UPDATING.
¥° . Unplugging the power cord.
¥± . Power Outage.
¥² . Dirt or Scratches on the disc.
¥³ . Opening a disc tray during processing.
Flash Update of a DVD
N O T E
WARNING
- R100
MAY RESULT IN PERMANENT
1