Epson P-2000 - Multimedia Storage Viewer Product Support Bulletin page 17

P-2000 Firmware Update Instructions:
Note: Before starting the firmware update process, confirm that there are no files on the
Memory Card.
To download and install the new firmware file, you will need the following:
• Windows-based PC or Macintosh computer with Internet access
• Operating Systems: Windows 98/ME/2000/XP Home/Pro
• Operating Systems: Macintosh 9.1-9.2.2, OS 10.2 to 10.3.
• Memory Card Reader/Writer
• 32MB or higher formatted Compact Flash or sD memory card (there must be no
• data on the card).
• P-2000 battery installed (fully-charged battery recommended)
• AC Adapter – the firmware update should be performed with the unit powered by its AC
power adapter.
Firmware Update Procedure:
Download the file epson11365.exe for Windows or epson11366.sea.hqx for Macintosh from
the Epson website.
Important Note: If the firmware version of the P-2000 is Version 2.x or later, there
Is no need to continue with the firmware update.
To verify the firmware version, power on the unit, select Settings in the
Home Menu and press the OK button. The firmware version is located in the
lower right-hand corner of the screen, as shown on the next page.
Page 2 of 5
PSB.2005.03.001R4