Epson P-2000 - Multimedia Storage Viewer Product Support Bulletin page 14

Release the Power switch and continue holding down the OK button until the message
Note:
below appears on the screen. If you do not see this screen, power off the unit and
start the firmware process again.
During the update process, the message screen will display the current firmware and
updated firmware versions. Then the message "Updating Resources" will appear.
Important:
Do not remove the battery or disconnect the AC adapter during the firmware
update process.
6. The firmware process is completed when you see the message "Resources Updated
Successfully" displayed on the screen.
Page 4 of 5
PSB.2005.06.002R2