Panasonic KX-MB2061 Operating Instructions Manual page 97

11.1.8 Network features (LAN connection only)
These features can be programmed through the web browser interface.
Feature
Setting the LAN features
Setting the community
name for SNMP
Setting the location
where you use this unit
Displaying the link local
address for IPv6
Displaying the IPv6
address for auto
configuration
Setting the IP address
for IPv6
Setting the default
router for IPv6
Setting the information
for scan to FTP
Setting the information
for scan to SMB
Setting the information
for scan to email
address, voice to email
address, fax to email
address and TAM to
email address
Tab
[LAN FEATURE]
[SNMP]
[SNMP]
[IPv6]
[IPv6]
[IPv6]
[IPv6]
[FTP FEATURE]
[SMB FEATURE]
[EMAIL FEATURE]
11. Programmable Features
Selection
Enter the LAN feature settings. See page 94 for details.
Enter the SNMP community name. Consult your service
provider or network administrator for details.
Enter the location information of the unit.
The link local address will be displayed.
The IP address for auto configuration will be displayed.
Enter the IP address for IPv6. Consult your service
provider or network administrator for details.
Enter the default router address for IPv6. Consult your
service provider or network administrator for details.
Enter the FTP server information to send scanned
images from the unit to an FTP server. See page 92 for
details.
Enter the SMB folder information to send scanned
images from the unit to an SMB folder. See page 93 for
details.
Enter the email server information to send scanned
image, fax message and/or voice message from the unit
via an email.
1. Start Multi-Function Station.
2. [Utilities] A [Configuration Web Page] A
[Network Configuration]
3. Type "root" as the user name, then enter the
password (feature #155 on page 79). A [OK]
4. Select the [EMAIL FEATURE] tab.
5. Click [Edit] next to [EMAIL SERVER].
6. Enter email address (from), email server
information, and time zone.
7. [Submit]
8. Close the web browser.
97