Panasonic KX-MB2061 Operating Instructions Manual page 88

11. Programmable Features
11.1.3 TAM features
Feature/Code
Selecting the voice prompt
MBNM1NM1NM2N
Changing the maximum
recording time for incoming
*1
messages
MBNM3NM0NM5N
Setting the remote operation
*1
ID
MBNM3NM0NM6N
Screening the incoming call
MBNM3NM1NM0N
Changing the greeting
message time for TAM/FAX
MBNM3NM1NM5N
Receiving a voice message
into the computer
MBNM3NM6NM5N
Setting the computer for PC
TAM reception
MBNM3NM6NM6N
Setting the web voice
playback mode
MBNM3NM6NM7N
Setting the web voice
playback access code
MBNM3NM6NM8N
Setting the TAM to email
address
MBNM3NM6NM9N
88
Selection
The voice guidance will be heard in the selected language.
M1N "ENGLISH" (default): English is used.
M2N "SPANISH": Spanish is used.
M1N "1 MINUTE"
M2N "GREET ONLY": The unit plays the greeting message but does not record
any incoming messages.
M3N "3 MINUTES" (default)
Note:
R You can also program this feature with the cordless handset (feature #305
on page 76) (KX-MB2060 optional).
1. MMenuN A MBNM3NM0NM6N
2. To activate the remote operation feature, enter a 3-digit remote operation
ID.
R The default setting is "111".
R To deactivate the remote operation feature, press MGN.
3. MSetN A MMenuN
Note:
R You can also program this feature with the cordless handset (feature #306
on page 76) (KX-MB2060 optional).
To hear an incoming call from the speaker when the answering machine is
recording the message.
M0N "OFF"
M1N "ON" (default)
M1N "16s" (default): Maximum greeting message time is 16 seconds.
M2N "60s": Maximum greeting message time is 60 seconds.
See page 69 for details.
If you wish to receive a voice message into a computer, activate this feature.
M0N "OFF" (default): Deactivate this feature.
M1N "ALWAYS": If the unit recognizes the connection to the computer, it will
transfer recorded voice message to the computer. If the unit cannot recognize
the connection, it will store the voice message into memory, and then transfer
the data after recognition of the computer connection.
To select the computer that will be used for receiving a voice message. See
page 30 for details.
See page 73 for details.
See page 73 for details.
If you wish to transfer an incoming voice message to desired email address,
activate this feature.
M0N "OFF" (default): Deactivate this feature.
M1N "ON": If you set the email destinations beforehand (page 89), the incoming
voice message will be automatically transferred as an email attachment to the
desired address. Memo recording (page 69) and conversation recording
(page 69) will not be transferred.