NEC 1760 - SilentWriter B/W Laser Printer User Manual page 136

Default Settings
Listed below are the factory default printer settings that
are in effect in the printer operator panel menu tree
when you unpack the printer.
Paper Handling
Paper Source—Cassette
Duplex Printing—Off
Interface
1760—Parallel
1765—Automatice Interface Monitor (AIM)
Emulation
Automatic Emulation Switching (AES)
Miscellaneous
Toner Density—Medium
Set Wait Time—30 seconds
Auto Continue—Off for 1760, On for 1765
Toner Saving—Off
Jam Recovery—On
Resource Saving—Auto
PCL Memory—0 KB
PS Memory—0 KB
Sharp Edge Technology (S.E.T.)—On
Power Saving—Off
Format Hard Disk—No
Resolution—600 dpi
Fuser Alarm Reset—No
Auto Start Page—On
Page Protection—Auto
Define Start Page—Demo
PCL Setup
Number of Copies—1
Font Source—Resident
A–2 User's Guide
Font ID Number—000
Lines Per Page—60
Symbol Set—Roman-8
Point Size—12
Pitch—10
Orientation—Portrait
Test Print
Test Page
Printer Resident Fonts
PostScript Level 2 emulation
• 35 Type 1 outline fonts
• 10 TrueType typefaces
PCL 5e emulation
• 35 Intellifonts outline fonts
• 10 TrueType typefaces
You can print out lists of the printer resident fonts in
either PCL or PostScript emulation. For instructions, see
page 4-21.
Printer Resident Symbol Sets
There are 31 available symbol sets resident in the
printer. ROMAN-8 is the default. The other available
symbol sets include
ISO L1, ISO L2, ISO L5, PC-8, PC-8 DN, PC-850,
PC 852, PC-8 TK, WIN L1, WIN L2, WIN L5, DESKTOP,
PS TEXT, VN INTL, VN US, MS PUBL, MATH-8, PS
MATH, VN MATH, PI FONT, LEGAL, ISO-4, IS0-6, ISO-
11, ISO-15, ISO-17, ISO-21, ISO-60,
ISO-69, WIN 3.0
note:
Printouts of these symbol sets are available
from NEC's FastFacts service. For more information on
FastFacts, see page 9-2.