Dell PowerEdge 180AS User Manual page 186

To configure a device connected to a PDU:
1 Click the Configure tab in the on-board web interface, then click the
PDUs category in the left column for a list of PDUs.
2 Click on the PDU you wish to access. The PDU Settings window opens.
3 Click the Outlet Settings button at the bottom of the PDU Settings
window for a list of devices connected to the PDU. The Outlet Settings
window opens.
4 To modify an outlet name, complete the following steps:
In the Name column, click on the link for the outlet you wish to
a
change. The Modify Power Outlet Name window opens.
If the device is a server, click Server, then select the name by clicking
b
on the appropriate entry in the Server Name column of the table
-or-
If the device is not a server, click Other Device, then enter the
appropriate text in the Name text box.
Click Save, then click Close to return to the Outlet Settings window.
c
5 To modify the power-on interval, enter the value in seconds in the text box
in the Power-On Interval column for the outlet being configured.
6 Click Save, then click Close to return to the PDUs window.
To power-control a device connected to a PDU:
1 Click the Configure tab in the on-board web interface, then click the
Outlets subcategory located under PDUs in the left column for a list of
available outlets.
NOTE: An outlet only appears in this list if a name has been associated with it.
2 Check the box next to the outlet(s) you wish to configure.
3 Click the On button to turn on the selected outlet(s).
- or -
Click the Off button to turn off the selected outlet(s).
- or -
Click the Cycle button to reboot the selected outlet(s).
169
Managing Your Remote Console Switch Using the On-board Web Interface