Light Bulb Replacement; Maintenance; Helpful Hints - Dimplex Electric Fireplace Practical User's Manual
Electric fireplace
Hide thumbs
Also See for Electric Fireplace:
- Practical user's manual (17 pages) ,
- User manual (15 pages) ,
- Assembly instructions (5 pages)
Table of Contents
Advertisement
MAINTENANCE
WARNING
Disconnect all power coming to fireplace
at main service panel before attempting
any maintenance or cleaning to reduce risk
of fire, electric shock or damage to
persons
Light Bulb Replacement:
NOTE
Allow at least 5 minutes for light bulbs to
cool off before touching bulbs to avoid
accidental burning of skin.
Light bulbs need to be replaced when you notice a
dark section of the flame. There are four
bulbs under the log set which generate the flames
and embers.
Tool Requirements: Slot Screw Driver
Bulb Requirements: Quantity of 4 clear
chandelier or candelabra bulbs with an E-12
(small) socket base, 60 watt rating. Example: GE
60BC or Philips 60CTC.
CAUTION
Do not exceed 60 watts per bulb.
When handling log only apply force to the
ember bed section not directly to the logs.
Helpful Hints
It is a good idea to replace all light bulbs at one
time if they are close to the end of their rated life.
Group replacement will reduce the number of
times you need to open the unit to replace light
bulbs. Long life bulbs are recommended to reduce
the frequency of bulb changes.
5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Electric Fireplace and is the answer not in the manual?
Questions and answers
How do I keep the ember bed color the same? I choose a color, and then it starts rotating through all the colors
To keep the ember bed color consistent on a Dimplex Electric Fireplace, use the on-screen controls or remote to select and maintain a single color from the available options. Ensure the settings are not changed after selecting your preferred color.
This answer is automatically generated