Do you have a question about the Electric Fireplace and is the answer not in the manual?
Questions and answers
Jennifer
January 19, 2025
How do I keep the ember bed color the same? I choose a color, and then it starts rotating through all the colors
1 comments:
Mr. Anderson
February 4, 2025
To keep the ember bed color consistent on a Dimplex Electric Fireplace, use the on-screen controls or remote to select and maintain a single color from the available options. Ensure the settings are not changed after selecting your preferred color.
Summary of Contents for Dimplex Electric Fireplace
Page 1
Control Code Number Here: Valued Customer, We are pleased that you have chosen to purchase an electric fireplace manufactured by Dimplex North America Ltd. Over the years, valuable memories will occur around the warmth and comfort of your hearth. Thank you for allowing our product to be the backdrop for those special moments.
5. If you have any technical questions, questions regarding the operation of your fireplace , or require service for your fireplace contact Dimplex North America customer service at 1-888- DIMPLEX (1-888-346-7539).
Page 3
CONTENTS PAGE IMPORTANT INSTRUCTIONS OPERATION MAINTENANCE WARRANTY AND ACCESSORIES...
IMPORTANT INSTRUCTIONS PLEASE RETAIN THIS USER’S GUIDE FOR FUTURE REFERENCE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before using this fireplace.
OPERATION FIGURE 1 FIGURE 2 REMOTE CONTROL The Optiflame fireplace is supplied with a radio frequency remote control (all models except BF36E). This remote control has a range of approximately 50ft. (15.25m), it does not have to be pointed at the fireplace and can pass through most obstacles (including walls).
Level 1: The flame effect is turned on and the first red indicator light is activated. Level 2: The flame effect remains on, the heater is activated to the low heat setting, and the first and second red indicator lights are activated. Level 3: The flame effect remains on, the heater is set to the high heat setting, and all three red indicator lights are activated.
WALL MOUNTED CONTROLS The fireplace can be installed with wall-mounted controls in addition to the controls provided. These controls include wall switches and thermostats. A. Wall Mounted Thermostats ALL MODELS WITH REMOTE CONTROL. When the fireplace is set to Level 2, or Level 3 the wall mounted thermostat will control the heat output of the unit.
MAINTENANCE WARNING Disconnect all power coming to fireplace at main service panel before attempting any maintenance or cleaning to reduce risk of fire, electric shock or damage to persons Light Bulb Replacement: NOTE Allow at least 5 minutes for light bulbs to cool off before touching bulbs to avoid accidental burning of skin.
To access the light bulb area: 1. Open steel curtain (remove glass doors if applicable). 2. Remove two screws on log grate and remove log grate (FIGURE 4). 3. Pull rear edge of ember bed up and forward by grasping ember bed by the sides (handle the logset only by the emberbed and not the logs) and pulling solidly until the rear tab pops out from under the back ledge, then lift out.
Company, damage or failure has resulted from accident, alteration, misuse, abuse, incorrect installation, or operation on an incorrect power source. Dimplex requires that all electric fireplace products are to be field serviced when ever possible. Dimplex electric fireplaces are covered by a free in home service for the period that the fireplace is under warranty.
Need help?
Do you have a question about the Electric Fireplace and is the answer not in the manual?
Questions and answers
How do I keep the ember bed color the same? I choose a color, and then it starts rotating through all the colors
To keep the ember bed color consistent on a Dimplex Electric Fireplace, use the on-screen controls or remote to select and maintain a single color from the available options. Ensure the settings are not changed after selecting your preferred color.
This answer is automatically generated