HP x280n - MediaSmart Connect - Digital Multimedia Receiver Installation And User Manual page 28

Step 4: Return to Your TV to
Complete the Setup
1 Point the MediaSmart remote control at the HP MediaSmart
Connect, press the Right Arrow button to select Next, and
then press OK.
If you are using a wireless connection to the
network, select the wireless option. The wizard searches
for available wireless networks and presents a list of what it
finds. Select the wireless network you want, and be ready to
enter your SSID and security key if necessary.
n
Make entries by using the onscreen keyboard:
Press an Arrow button on the remote control to select an
item or key on the onscreen keyboard, and then
press OK.
Or
Press a number button on the remote control as needed
to scroll to the character you want.
Getting Started
IMPORTANT: If your wireless network is not listed, select
!
the Advanced mode and enter it manually.
2 Follow the onscreen instructions to finalize the set up of your
network. The wizard checks for the network, the IP address,
and then for access to the Internet across the network. For
information about connecting your device to your home
network, see "Chapter 2: Connecting your HP MediaSmart
Connect to your Home Network" on page 35.
3 Optional: Set up the Extender for Windows Media Center
(requires the Windows Vista Home Premium or Ultimate
operating system).
The HP MediaSmart Connect displays an eight-digit key on
your HDTV screen, along with instructions for you to enter the
key into your Media Center settings on the computer. For
more information, see "Chapter 6: Using the Extender for
Windows Media Center" on page 77.
4 Wait while the HP MediaSmart Connect looks for authorized
servers on the network.
28