HP x280n - MediaSmart Connect - Digital Multimedia Receiver Installation And User Manual page 20

Connecting power
Connect the AC power adaptor to the connector on your device
and to the AC power outlet. The HP MediaSmart Connect
turns on.
IMPORTANT: The HP MediaSmart Connect has no Power
!
button; press the On/Off button on the remote control
to put the device into standby mode and awaken it, or
unplug the power adaptor to turn it completely off.
Getting Started
Installing remote control batteries
Insert two AA batteries into the remote control, ensuring that you
place them with the polarity properly aligned.
1 Press and open the cover on the rear of the remote control.
2 Insert the batteries into the remote control, and ensure that
you match polarities.
3 Close the cover.
20