Changing Procedure - GEONAUTE HEART RATE MONITOR CW600T Manual

Batteries :
The battery used in the chest belt is a CR 2032.
Watch :
The battery used in the watch is a CR 2032.
We recommend that you not change the watch batteries yourself,
but rather have the job done by a specialized DECATHLON repair shop. If you change
the battery yourself, you may damage the seal and lose both the water tightness
and guarantee on the product.
Pectoral belt :
Please check the availability of the battery with your dealer before replacing it.
heart monitor light on the watch does not flash when it is close to the belt, it may
be necessary to change the battery in the chest belt.

Changing procedure :

You can easily change the belt battery yourself, without the aid of any particular tool.
1 unscrew with the aid of a coin, then remove the cover of the battery compartment.
2 remove the old battery by tapping on the opposite side of the belt.
3 replace the used battery with a lithium 3V type CR2032 battery without touching
4 carefully replace the cover, then screw it down again by a quarter turn to the it on its 2 terminals (it may discharge), with the +terminal (printed surface) up.
"CLOSED" position
If there is a problem, contact your retailer.
If the heart rate indications become inconsistent, or if the
Battery
Contacts
25