Configure The [Advanced Camera Settings] - Canon VB-M40 Administrator's Manual

Change the Video Window Format
1 Click the video window menu button to display the
menu.
Click [Video Format] and select the video format
2
([JPEG] or [MPEG-4], or [H.264]) from the submenu.
• [MPEG-4] is unavailable.
• The audio is not in synch with the live video when
[H.264] is selected.
• [H.264] is unavailable.
• The audio is not in synch with the live video when
[MPEG-4] is selected.
Change the Video Window Resolution
1 Click the video window menu button to display the
menu.
2 Click [Video Receive Size] and select the resolution
([160x120], [320x240], [640x480], [1280x960], or
[Default]) from the submenu.
Select [Default] to use the camera's resolution.
The resolution cannot be specified for [H.264] format.
• [1280 x 960] is unavailable.
• The resolution cannot be specified for [MPEG-4]
format.
Important
When you display more than one video window for the same
camera, changes to the resolution of one of these windows are
reflected to all of the other windows.
Note
• If you save the layout (P. 4-12), the [Video Receive Size]
setting is also saved.
• The size used for [Default] is determined the first time you
display an image from the camera. The size on the Viewer will
not change, even if you change the size setting on the camera.
Display on the Full Screen
You can display the video window image on the full
screen.
1 Click the video window menu button to display the
menu.
A white frame is displayed surrounding the selected
video window.
2 Select [Video Display Size] and select [Full Screen]
from the submenu.
A confirmation message is displayed. Click [Yes].
3
The image from the selected video window is
displayed on the full screen.
4 To exit full screen display, press the Esc key.

Configure the [Advanced Camera Settings]

1 Click [Window] > [Camera Control].
Click the video window of the camera you want to
2
configure and click [Control] on the [Camera Control]
dialog box to get control of the camera.
Click [Advanced] on the [Camera Control] dialog box to
3
display the [Advanced Camera Settings] dialog box.
Click the tab that you want to configure.
4
5 After configuring the settings, click [Close].
Important
If camera control is lost while the [Advanced Camera Settings]
dialog box is open, you cannot continue configuring the
settings. Click [Control] on the [Camera Control] dialog box
again to get control and continue configuring the settings.
Configure the Camera
4
4
-7