Notes - Canon VB-M40 Administrator's Manual

Notes

Compatibility with the Network Video Recorder VK-64/16
Notes on Installation
This software cannot exist with VK-64/16 on the same computer. Do not install this software onto a computer where
VK-64/16 is installed. You can install this software after uninstalling VK-64/16. However, please be aware of the following:
• You cannot use the cameras and recording schedule settings you added with VK-64/16. You must add and configure the
cameras and schedules again.
• You cannot use the recording files and event information associated with VK-64/16.
• You cannot play back recordings made with VK-64/16.
• This software requires a computer with specifications that are higher than those required for VK-64/16. Therefore, the
computer used for VK-64/16 may not meet the operation requirements for this software.
Notes on Protocol Compatibility
This software is not compatible with VK-64/16 protocols, because the protocol used between the Viewer and the Storage
Server has been significantly changed. Therefore, you cannot connect to a VK-64/16 Storage Server from the Viewer in this
software. Similarly, you cannot connect to this software's Storage Server from the Viewer in VK-64/16.
Notes on Recording Data and Event Data Compatibility
This software uses event data and recording file formats that are different from VK-64/16. VK-64/16 recordings can be
played back using QuickTime Player. However, the recordings for this software are not supported by QuickTime Player.
Note, however, that you can use QuickTime Player to play back a .mov file created using the [Extract Video] feature in this
software.
About Licenses
1
1
-5