Settings After Installation; Windows Firewall Settings - Canon VB-M40 Administrator's Manual

Settings After Installation

Configure the following setting after installing this software
according to the operating system you are using:
Windows Firewall
Setting
Security Level
Setting
Warning when
Viewer Starts
Sound Settings for
Using the Audio
Feature

Windows Firewall Settings

The changes to the settings are already complete if you
selected the [Add storage server programs to the
Windows Firewall exception list] check box during
installation. If you did not select the above check box
during installation, perform the following procedure to
change the Windows Firewall settings.
The following settings are not required if you install the
Storage Server and Viewer onto the same computer.
When using Windows 7 or Windows Server
2008 R2
Click [Start] > [Control Panel] to open the [Control
1
Panel].
Click [System and Security] > [Windows Firewall].
2
Click [Advanced Settings] to display the [Windows
3
Firewall with Advanced Security] window.
Click [Inbound Rules] and select [New Rule] from the
4
[Action] menu to start the [New Inbound Rule Wizard].
Click [Port], and then click [Next].
5
Click [TCP] and [Specific local ports], and then enter
6
80 as the port number. Then click [Next].
2
-4
Windows Server
Windows 7,
2008, Windows
Windows Vista
Server 2008 R2
—
—
( : Required, : Not required)
—
Click [Allow the connection], and then click [Next].
7
8 Click [Next].
Enter a name (such as the Storage Server or Storage
9
Server Group name) in [Name] and click [Finish].
The added inbound rule should be displayed in the
10
[Windows Firewall with Advanced Security] window,
with a checkmark icon displayed next to the rule.
When using Windows Vista or Windows Server
2008
Click [Start] > [Control Panel] to open the [Control
1
Panel].
Click [System and Security] > [Windows Firewall].
2
In the Control Panel Classic View, double click
[Windows Firewall].
3 Click [Change settings].
If the [User Account Control] dialog box is displayed,
click [Continue].
Click the [Exceptions] tab and click [Add Port].
4
5 In the [Add a Port] dialog box, enter the name of the
Storage Server and 80 as the port number. Make sure
that [TCP] is selected and click [OK].
6 Confirm that the added Storage Server is now
displayed in the [Windows Firewall] dialog box and that
the check box is selected. Then, click [OK].