Setting Mtu Value For Vn-E4; Acquiring Network Negotiation Setting From Vn-E4; Setting Network Negotiation For Vn-E4; Acquiring Pppoe On/Off Status From Vn-E4 - JVC VN-E4U - 4 Channel Network Encoder Api Manual

4ch network encoder
Hide thumbs Also See for VN-E4U - 4 Channel Network Encoder:
Table of Contents

Advertisement

5. API for Acquiring/Changing Parameters of VN-E4 _

Setting MTU Value for VN-E4

Format
Example
Example of Response
Interpretation
Allowed user

Acquiring Network Negotiation Setting from VN-E4

Format
Example of Response
Interpretation
Allowed users

Setting Network Negotiation for VN-E4

Format
Example
Example of Response
Interpretation
Allowed user

Acquiring PPPoE On/Off Status from VN-E4

Format
Example of Response
Interpretation
Allowed users
/api/param?network.interface.mtu=data
/api/param?network.interface.mtu=1000
network.interface.mtu&202 Required(network.interface.status=restart)
Change the MTU value. The range of set value is between 512 to 1500 for IPv4 and between 1280 to 1500 for
IPv6. Upon setting this API, execute the "network.interface.status=restart" API for enabling network setting
changes to enable the new settings. Upon changing the MTU value, VN-E4 will be rebooted using the
"network.interface.status=restart" API for enabling settings. As such, access will not be possible for about 1
minute.
admin
/api/param?network.interface.negotiation
network.interface.negotiation=auto&200 OK
Acquire the network Negotiation setting. Either auto, 100full, 100half, 10full or 10half will be returned.
admin, operator, user
/api/param?network.interface.negotiation=data
/api/param?network.interface.negotiation=auto
network.interface.negotiation&202
Required(network.interface.status=restart)
Change the network Negotiation setting. Set to auto, 100full, 100half, 10full or 10half. Upon setting this API,
execute the "network.interface.status=restart" API for enabling network setting changes to enable the new
settings. Upon changing the network Negotiation, VN-E4 will be rebooted using the
"network.interface.status=restart" API for enabling settings. As such, access will not be possible for about 1
minute.
admin
/api/param?network.interface.pppoe.status
network.interface.pppoe.status=off&200 OK
Acquire the on/off status of PPPoE. Either on or off will be returned.
admin, operator, user
5.9. Network Details
50

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vn-e4

Table of Contents