5. API for Acquiring/Changing Parameters of VN-E4 _
Acquiring FTP Server Address Setting from VN-E4
Format
Example of Response
Response example
when setting field is
left blank
Interpretation
Allowed users
Setting FTP Server Address for VN-E4
Format
Example
Example of Response
Interpretation
Allowed users
Acquiring FTP Server Directory Setting from VN-E4
Format
Example of Response
Response example
when setting field is
left blank
Interpretation
Allowed users
Setting FTP Server Directory for VN-E4
Format
Example
Example of Response
Interpretation
Example
Allowed users
/api/param?application.ftp.host
application.ftp.host=10.0.0.200&200 OK
application.ftp.host=&200 OK
Acquire the FTP server address setting used for FTP transmission via alarm.
admin, operator, user
/api/param?application.ftp.host=data
/api/param?application.ftp.host=10.0.0.200
application.ftp.host&200 OK
Change the FTP server address setting used for FTP transmission via alarm. Specify the IP address or FQDN.
The maximum FQDN size is 60 bytes. Specify as 0.0.0.0 when the FTP server is not set. It is also possible to
leave the setting field blank as follows.
/api/param?application.ftp.path=%00
admin, operator
/api/param?application.ftp.path
application.ftp.path=subdir1&200 OK
application.ftp.path=&200 OK
Acquire the FTP server directory setting used for FTP transmission via alarm.
admin, operator, user
/api/param?application.ftp.path=data
/api/param?application.ftp.path=subdir1
application.ftp.path&200 OK
Change the FTP server directory setting used for FTP transmission via alarm. It is possible to set FTP
transmission to a directory under the FTP server home directory by specifying that directory name. Use / to
segment the directory. The maximum directory name size is 60 bytes.
/api/param?application.ftp.path=subdir1/subdir2
By leaving the setting blank as follows, FTP transmission will be set to the FTP server home directory.
/api/param?application.ftp.path=%00
admin, operator
5.5. Alarm Environment Setting
34