JVC C11U - VN Network Camera Instructions Manual page 72

Operations (Step 6 Operations with a Web Browser)
6-4 Settings with a Web Browser (5. FTP Settings) (Continued)
Item
FTP Function
Snap Shot FTP
Upload Interval
File name
Username
Password
Host IP Address
FTP Port
FTP Folder
Connection
Disconnect every time
Error Recovery
On connect error
Retry forever
Retry for * min
On transfer error
Stop Uploading
72
For enabling/disabling the FTP functions.
Select here if JPEG images are to be uploaded to an FTP ser ver regu-
larly.
Specify the interval with which images are uploaded to an FTP server.
(0 to 84600 seconds)
Specify the file name of an image to be uploaded.
*.jpg Uploading is performed with the file name entered here.
❈ Only one image file remains in the FTP server as files have the
same file name. (The latest image file overwrites.)
Time Stamp The current time, obtained from the NTP server, is used as the file name
for uploading in the form of "YYYY-MM-DD-HH-MM-SS-mmm".
❈ As each file has an unique name for uploading, all image files
uploaded remain in the FTP server.
Enter the user name (up to 16 characters) to be used for verification with
the FTP server.
Enter the password (0 to 32 characters, shown as asterisks " * ") to be
used for verification with the FTP server.
Enter the IP address of the FTP server to which images are uploaded.
Enter the port number of the FTP server to which images are uploaded.
Enter the folder name in the FTP server to which images are uploaded.
Set whether to cut off the connection during every upload.
If this is selected, connection is cut off every time an image has been
uploaded.
Connection will be reestablished when the next image is uploaded.
Specify the action to be taken when an FTP error has occurred.
Specify the action to be taken when an error with TCP connection or
FTP verification has occurred.
Error recovery is attempted until the power to VN-C11 is disconnected.
Error recovery is attempted for a specified period of time.
(1 to 600 minutes)
Specify the action to be taken when a file transfer error has occurred
during image uploading.
With the occurrence of a transfer error, the VN-C11 FTP function is auto-
matically disabled. Select here to enable the function again.
Effect