Installing The Software - JVC C11U - VN Network Camera Instructions Manual

Preparations (Step 2 Setting the Network)

2-1 Installing the Software

For operating VN-C11, install the software from the CD-ROM, which is supplied with
the camera in the following procedure.
Installing V.Networks Controller
1. Select [Setup.exe] found in the [JVC] folder.
2. Proceed by following the instructions shown on the screen.
3. If the installation is successfully executed, the [V.Networks] icon is created in [Programs] of the
Windows [Start] menu.
Installing V.Networks Setup Tool
1. Open the [JVC] folder and then the "setup" folder inside. Select [Setup.exe].
2. Proceed by following the instructions shown on the screen.
3. If the installation is successfully executed, the [V.Networks] icon is created in [Programs] of the
Windows [Start] menu.
Installing DirectX 8.1 and Codec
[DirectX 8.1] and ISO MPEG4 Codec are required for viewing MPEG4 images with VN-C11. If the
version currently installed in the PC is older, install the version 8.1 by following the procedure below.
Installing Codec
Select [WMPCD8.exe] and install Codec by following the instructions shown on the screen.
Installing DirectX 8.1
1. Click [Start] and select [Run]. And enter [dxdiag] in the box and click [OK].
2. If the version is older, select [DX81NTeng.exe] and follow the instructions on the screen.
~~~~~~~~~~~~~~~
[V.Networks Controller] is displayed in [V.Networks].
[vn-c11u Setup Tool] is displayed in [V.Networks].
19