Installation; Install The Print Server And Set Up One Pc - NETGEAR PS121 - USB Mini Print Server User Manual
Multifunction printer server
Hide thumbs
Also See for PS121 - USB Mini Print Server:
- User manual (45 pages) ,
- Installation manual (7 pages) ,
- Specification sheet (2 pages)
Table of Contents
Advertisement
NETGEAR USB Multifunction Printer Server PS121v2 User Manual
Installation
First, install and set up the print server and a single PC. Then set up additional PCs to work with
the print server.
Note: For TCP/IP LPR printer installation, see
"Installation for TCP/IP LPR Printing" on
page 2-6
Install the Print Server and Set up One PC
1. Power on your computer, let the operating system boot up completely, and log in as needed.
2. Insert the Resource CD for the PS121v2 into your CD drive. The CD main page opens.
3. Click Install and Set Up the Print Server with This PC to start the installation wizard.
Figure 2-2
Installation and Setup
2-3
v2.0, April 2007
Advertisement
Table of Contents
Need help?
Do you have a question about the PS121 - USB Mini Print Server and is the answer not in the manual?
Questions and answers