Installation For Tcp/Ip Lpr Printing; Connect The Print Server - NETGEAR PS121 - USB Mini Print Server User Manual

Multifunction printer server

Hide thumbs Also See for PS121 - USB Mini Print Server:

Table of Contents

NETGEAR USB Multifunction Printer Server PS121v2 User Manual

1. Power on your computer, let the operating system boot up completely, and log in as needed.

2. Insert the Resource CD into your CD drive. The CD main page opens.

Figure 2-4

3. Click Set Up the PC to Use an Installed Print Server to install the SmartWizard, which will

allow you to print via the print server.

Your USB Multifunction Print Server is now ready to use. For instructions on using the

multifunction feature, refer to

page

3-1.

Installation for TCP/IP LPR Printing

First, connect the print server. Then follow the instructions for the Windows Add Printer Wizard

for your operating system.

To use TCP/IP LPR printing:

1. Connect your Print Server to your network configuration.

2-6

"Reserving a Multi-Function Printer to Scan, Copy, or Fax" on

v2.0, April 2007

Installation and Setup

Table of Contents

Do you have a question about the PS121 - USB Mini Print Server and is the answer not in the manual?

Ps121v2