Epson C850071 - RIP Station 5000 User Manual page 58

Page 58
T C P S :
O SET OLOR AND APER ETUP OPTIONS
• Click the Color and Paper Setup tab in the Printer Setup window.
Color and Paper Setup
—Specifies the default color mode to be used: Color or Grayscale . Before per-
Color Mode
forming calibration on the RIP Station, select Color as the Color Mode.
—Specify whether to print on paper sizes (for example, letter, legal,
Default Paper Sizes US
tabloid), or paper sizes (for example, A4, B4, A3) by default. When no page size is
Metric
defined within a PostScript file, jobs are printed on letter paper if you select US , or A4 paper
if you select Metric .
—Specify whether to substitute Courier for unavailable fonts. If
Allow Courier Substitution
this option is set to No , jobs with fonts that are not available on the RIP Station hard disk
will not print due to a PostScript error.
—Specify whether the RIP Station should print the available portion of a
Print to PS Error
print job when it encounters a PostScript error. Select Yes to print the portion of the job
that was processed before the error occurred; select No to cancel the job entirely whenever a
PostScript error is encountered.
—The RGB source is the color space used to control color for conversion from
RGB Source
screen to printed output. EFIRGB , which is the default, is based on the reference points used
in the creation of the RIP Station software; sRGB (PC) is based on an average of a large num-
ber of PC monitors; and Apple Standard is the standard reference point for Apple's Col-
orSync software.
—Select On to print black text and graphics as one color black,
Pure Black Text/Graphics
using 100% black ink only. Select Off to print black text and graphics using all four colors
of ink.