Epson C850071 - RIP Station 5000 User Manual page 30

3. Under Check Print Settings, choose the desired calibration set.
Choose the appropriate calibration set for the type of media on which you will be printing
most often.
It is not necessary to recalibrate before printing on a media type other than the one
N :
OTE
you select here.
4. Under Generate Measurement Page, click Print.
5. Choose the paper size and input tray to use for the measurements page and click Print.
6. Use the EPSON Color Calibrator to read the measurements page data into a file.
See your EPSON Color Calibrator documentation for instructions.
7. Under Get Measurements, click From File and browse to the location of the file you created
with the EPSON Color Calibrator.
8. Select this file and click Open.
9. When you are notified that the measurements were read successfully, click OK, then click
Apply to implement the new calibration.
Changing the calibration has the potential to affect all jobs for all users, so you may
N :
OTE
want to limit the number of people authorized to perform calibration. An Administrator
password can be set to control access to calibration from the RIP Station Control Panel.
Page 30